1. The
илмек should be manufactured by a formal professional factory in accordance with the technical conditions and safety specifications of the илмек, and the product should have the quality certificate of the manufacturer, otherwise it is not allowed to be used.
2. The new илмек should be subjected to a load test, and the opening of the measuring илмек should not exceed 0.25% of the original opening.
3.During use, check whether the илмек is cracked or severely deformed, corroded and worn.
4. The
илмекжылына бир жолу текшерилип турушу керек. Сыноо учурунда, 1.25 эсе жол берилген жумушчу жүктү 10 мүнөттүк статикалык текшерүүнү жүргүзүңүз жана лупа же башка ыкмалар менен текшериңиз. Жаракалар, жаракалар жана калдык деформация болбошу керек.
5. Кооптуу үч бөлүмдү керосин менен тазалоо керек. Жарыктар бар -жогун билүү үчүн лупаны колдонуңуз. Плита үчүн
илмекs, эскирүү үчүн бадалдарды жана казыктарды текшериңиз.
6. Defects on the илмек shall not be repaired.